Patch Attach is a quick attach for patches. Patch Attach is the only truly dry cleanable glue for patches. Patch backs come in different forms: plain fabric, plastic coated with an exposed embroidered edge, and a completely coated plastic back with no exposed embroidery. Note: Test on scrap fabrics first.
Directions
Patches with Exposed Fabric:
- If possible, pre-wash fabric or garment to remove sizing.
- Apply Patch Attach along the edge of the entire patch back.
- Let glue dry for 10 minutes.
- Position patch on garment. Cover with press cloth to avoid scorching.
- Press with dry iron on cotton setting (no steam) for 60 seconds.
- If possible, iron on the reverse side for an additional 30 seconds.
Patches with Plastic Backs and No Exposed Fabric:
- With a sharp knife or razor, score the plastic backing to expose fibers underneath the patch edge around the entire patch. Be careful not to cut through the patch!
- If possible, pre-wash fabric or garment to remove sizing.
- Apply Patch Attach along the edge of the entire patch back.
- Let glue dry for 10 minutes.
- Position patch on garment. Cover with press cloth to avoid scorching.
- Press with dry iron on cotton setting (no steam) for 60 seconds.
- If possible, iron on the reverse side for an additional 30 seconds.
- Materials It Bonds: Backpacks, Hats, Patches (Best on patches with exposed fabric back)
Features: Permanent, Dries Clear, Non-Toxic, Waterproof, Dry Cleanable, UVA Resistant
Cure Time: 24 Hours
Helpful Hints: To Remove: Patch Attach can be washed off with water before ironing, even if it’s dry Patches can be removed from garments by re-heating the patch from the back with an iron on cotton setting for 15-30 seconds. Use press cloth. Once ironed, there is no way to remove the glue from the fabric.
